35 Comments

  1. John Our Home from Scratch
    March 25, 2020 @ 5:28 pm

    Here are the router bits I used.

    The beading bit: http://amzn.to/2nGXumr
    The notching bit: http://amzn.to/2n4guIM

    Reply

  2. Ursa Major65
    March 25, 2020 @ 5:28 pm

    DIY? LOL!

    Reply

  3. Tran The Clever
    March 25, 2020 @ 5:28 pm

    Man all your tools look brand new 2:15

    Reply

  4. 13V
    March 25, 2020 @ 5:28 pm

    Uhhhh, yea….not very good if you can't really see because the project is done already. Note for next time.

    Reply

  5. Adam Luzier
    March 25, 2020 @ 5:28 pm

    Should have squared it up first. I think you would have had less trouble with the face frame.

    Reply

  6. Duve Phannadeth
    March 25, 2020 @ 5:28 pm

    Nice build!

    Reply

  7. Cr Kr
    March 25, 2020 @ 5:28 pm

    John, I watch a lot of DIY videos and I really appreciated the realness that you shared and left in your video. Kids in background, not enough clamps, biscuits not perfect – these seem to follow me with every DIY project, and it’s nice to see in your videos.

    Reply

  8. J G
    March 25, 2020 @ 5:28 pm

    DIY (if you have a full carpentry workshop and skills)

    Reply

  9. Luis Rodas
    March 25, 2020 @ 5:28 pm

    John, what color stain did you use for the counter tops?

    Reply

  10. Mark E P
    March 25, 2020 @ 5:28 pm

    You do beautiful work man. I am painting my kitchen cabinets now and using the SW Pro Classic and I can see all of the brush marks in the cabinets. I'm going to have to go back and sand all of this down and kind of start over. I would love to have them sprayed but I don't dare attempt that myself as I have never sprayed before and all of the prep work that would be involved to spray the cabinets themselves.

    Reply

  11. Tayler Hazelwood
    March 25, 2020 @ 5:28 pm

    Hi John I’m attempting this and having a lot of difficulty. My router seems to be causing the wood to jump and doesn’t sound right. What am I doing wrong? How should I be feeding the wood?

    Reply

  12. Tony Flores
    March 25, 2020 @ 5:28 pm

    John, are the doors and drawer prefabricated? If so, where from?Thanks! Looks amazing btw!

    Reply

  13. William Ohl
    March 25, 2020 @ 5:28 pm

    Good job!

    Reply

  14. Elias Rodriguez
    March 25, 2020 @ 5:28 pm

    Do you have a word doc or pdf of everything you use and did of the DIY Built-in cabinets?

    Reply

  15. iamvintage
    March 25, 2020 @ 5:28 pm

    hello Jone my name is Koba i love your YT, how much will u charge me for building me the same of this

    Reply

  16. Codreanu VICTOR
    March 25, 2020 @ 5:28 pm

    Hi
    Can i get you to make 2 units for me?

    Reply

  17. Gilmore
    March 25, 2020 @ 5:28 pm

    Looks amazing. Can I borrow all your stuff?

    Reply

  18. Jim Quinty
    March 25, 2020 @ 5:28 pm

    I like what you did but instead of haunching the stiles and rail I found the assembly to be easier to put the bead on afterwards with glue and micro pins just my opinion but still a nice job

    Reply

  19. IAMGROOT
    March 25, 2020 @ 5:28 pm

    For your stiles, top rail and mid rail you indicate 2 inch width in your excel file.. Are you simply ripping a 1X3 down to width?

    Reply

  20. Kenny Martin
    March 25, 2020 @ 5:28 pm

    John, great looking work. I'm getting ready to build a cabinet/bookshelf like the ones you have here. I only have around 40"w & 18" deep to work with. what are the dimensions of the cabinet & shelf? Forgive me if you answer this in the video, I haven't finished watching yet.

    Reply

  21. Paulo Munoz
    March 25, 2020 @ 5:28 pm

    Awesome video, can you please tell me the bit size, if you have a link that is even better.

    Thank you.

    Reply

  22. Motti Horesh
    March 25, 2020 @ 5:28 pm

    John I was wondering how high did you set the notching bit

    Reply

  23. Romeo G
    March 25, 2020 @ 5:28 pm

    Great Job, What kind of paint sprayer do you use and what do you recommend? Thank you.

    Reply

  24. Mo Ghotbi
    March 25, 2020 @ 5:28 pm

    Beautiful bead detail on the face frame.

    Reply

  25. Sean Kline
    March 25, 2020 @ 5:28 pm

    Whats that long clamp you used as a guide when cutting the dados in the plywood?

    Reply

  26. Toti Larson
    March 25, 2020 @ 5:28 pm

    What kind of HVLP sprayer are you using and do you like it? I'm building my cabinets right now and will be painting in the next few weeks

    Reply

  27. pohui wu
    March 25, 2020 @ 5:28 pm

    thank you for sharing!, I am #300 of likes !

    Reply

  28. Chris Laviola
    March 25, 2020 @ 5:28 pm

    John,
    Thank you for sharing your work and ideas. When attaching the beaded face frame what size biscuits are you using an the depth that you are setting them at?

    Thank you
    Chris

    Reply

  29. Martin B
    March 25, 2020 @ 5:28 pm

    Hi John, great video, thanks for posting. I have a quick detail question for you. On the bookshelves that sit on top of the base cabinets, it looks like there's a reveal on the face frame. How far does the face frame project past the side panel of the bookshelf? It looks like maybe 1/8" or 1/4"? Thanks again for this great tutorial.

    Reply

  30. Gordon Ferris
    March 25, 2020 @ 5:28 pm

    When you made the center notch on the router, on the second pass where you took out the right side of the notch, how did you prevent tearout? The rotation of the bit should have caused a major problem.

    Reply

  31. Geoff Else
    March 25, 2020 @ 5:28 pm

    Nice work. Jealous of that basement workshop space! Wow! Any dust collection or air filtration?

    Reply

  32. J Cas
    March 25, 2020 @ 5:28 pm

    Great tutorial.  Quick question…What kind of rail did you put on your workbench top?

    Reply

  33. Thadius Mayonnaise
    March 25, 2020 @ 5:28 pm

    Great job – how do you make sure the cabinets matche to the wall on the sides? If there's any bumps in the plaster work will there not be a gap?

    Reply

  34. Paul Schuster
    March 25, 2020 @ 5:28 pm

    Just one more question.. Do beaded face frame cabinets with inset doors require a different type of cabinet hinge?

    Reply

  35. Paul Schuster
    March 25, 2020 @ 5:28 pm

    I am getting ready to purchase a Kreg router table system. They also offer a beaded face frame fence which is fairly expensive.. Do I need this? What would be the advantage over the standard fence as you show here?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *